Ideas To Make Log Swing Plans
Log swing plans – A cedar wood swing can add a unique look to your backyard and provide many hours of enjoyment. If you have some knowledge of woodworking, you can build your own cedar wood swing in a day or less. Cut 45 degree angles at both ends of the four 97-inch registers. The angles of each record must run in opposite directions. Place two of the cedar trunks 97 inches above the ground in a V-shape. Arrange them so that the ends are exactly 72 inches apart. Do the same with the other two records.
Drill two pilot holes in the cups of the 97-inch log swing plans at the point where the angles meet at the top of the V. Use two large screws, at least 8 inches in length, to connect the registers together at the top. Place a washer and a nut on the end of the bolt and tighten with a ratchet or wrench. Join the other set of records together in the same way.
Log swing plans, chisel both ends of the 84-inch trunk to create a wedge shape that fits perfectly into the angles formed by the top of the frame. Drill a hole from the top of the 84-inch record from the bottom. The hole should be 8 inches from each end of the center column. Who will use these holes to suspend the chair.